RobMeerman.co.uk

User Tools

Site Tools

You are here: RobMeerman.co.uk » OpenHAB
Trace:
openhab

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision 		Previous revision
openhab [2018/01/02 23:32]
robm [Basic Installation (OpenHAB 2)] 		openhab [2018/01/03 00:31] (current)
robm
Line 100: Line 100:
 </code> </code>
  
 +<note tip>The LightwaveRF Link protocol is documented at https://api.lightwaverf.com/introduction_basic_comms.html</note>
  
 ===== Configuring the (not yet installed) LightwaveRF Bindings ===== ===== Configuring the (not yet installed) LightwaveRF Bindings =====
Line 107: Line 108:
 The instructions for the legacy (openHAB v1) bindings for LightwaveRF are [[https://github.com/openhab/openhab1-addons/wiki/LightwaveRF-Binding|here]]. The instructions for the legacy (openHAB v1) bindings for LightwaveRF are [[https://github.com/openhab/openhab1-addons/wiki/LightwaveRF-Binding|here]].
  
-Create a new file at ''/opt/openhab/conf/services/lightwaverf.cfg'' (all files in this directory are named, so just ensure it is unique. Most guides call this file ''openhab.cfg''), and copy the sample from GitHub. I modified mine to **disable** register on start-up, since I've done that manually above.+Create a new file at ''/opt/openhab/conf/services/lightwaverf.cfg'' (all files in this directory are named, so just ensure it is unique. Most guides call this file ''openhab.cfg''), and enter the following:
  
-<code:bash> +<note important>Do **not** copy the sample at [[https://github.com/openhab/openhab1-addons/wiki/LightwaveRF-Binding|GitHub]], it has errors! 
-################################### LightwaveRf Binding #####################################+ 
 +''lightwaveRf:ip'' should be ''lightwaverf:ip'' (note the case!) throughout, and the sendport and receiveport numbers are backwards! 
 + 
 +</note> 
 + 
 +<code:bash>################################### LightwaveRf Binding #####################################
 # #
 # The IP Address of the LightwaveRf Wifi Link you can use the broadcast address (required) # The IP Address of the LightwaveRf Wifi Link you can use the broadcast address (required)
-lightwaveRf:ip=255.255.255.255+lightwaverf:ip=255.255.255.255
 # The port to monitor for messages you shouldn't need to change this # The port to monitor for messages you shouldn't need to change this
-lightwaveRf:receiveport=9760 +lightwaverf:receiveport=9761 
-# The port to send messages on, it will also be monitored for incoming messages +# The port to send messages on, it will also be monitored for incoming messages
 # you shouldn't need to change this # you shouldn't need to change this
-lightwaveRf:sendport=9761+lightwaverf:sendport=9760
 # For a new computer you will need to register it with the wifi link to be allowed to send messages # For a new computer you will need to register it with the wifi link to be allowed to send messages
 # setting this to true we will send a registration message on startup. You will need to confirm # setting this to true we will send a registration message on startup. You will need to confirm
openhab.1514935947.txt.gz · Last modified: 2018/01/02 23:32 by robm

Page Tools

Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Noncommercial-Share Alike 4.0 International
CC Attribution-Noncommercial-Share Alike 4.0 International Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki